SS Equipment

Specifications

• 2017 New Holland C238 Base
• Year2017
• ManufacturerNew Holland
• Model NameC238
• Trim NameBase
• Generic Type (Primary)Compact
• DimensionsBucket hinge pin: 131.1 in (3330 mm)| Top of ROPS: 80.4 in (2043 mm)| Bottom of level bucket, fully raised: 124.2 in (3155 mm)
• Overall Length(without attachment with coupler): 118.9 in (3021 mm)
• Raking Angle DegreesDump angle, degrees: 54.7°| Rollback, bucket on ground, degrees: 32.8°| Rollback, bucket at full height, degrees: 84.8°| Angle of departure, degrees: 32°
• Ground Clearance9.5 in (243 mm)
• Overall Width76 in (1930 mm)
• Engine ManufacturerFPT / F5BFL413E B002
• Bore3.9" (99mm)
• Stroke4.3" (110mm)
• Displacement207 cu in (3.4 L)
• Fuel InjectionHPCR Direct
• Engine PowerHorsepower per SAE J1349 Gross: 90 hp (67 kW) @ 2500 rpm| Horsepower per SAE J1349 Net: 84 hp (63 kW) @ 2500 rpm
• Engine Torque (rpm)Peak: 282 lb-ft (383 Nm) @ 1400 rpm
• Drivetrain
• Operating SpeedTravel speed, low range: 5.1 mph (8.2 km/h)
• Performance
• Operating ConditionsRated operating load, 50% tip: 3800 lbs (1723 kg)/ 35%: 2660 lbs (1209 kg) | Tipping load: 7600 lbs (3447 kg)| Breakout force, lift cylinder: 6110 lbs (27.2 kg)| Breakout force, bucket cylinder: 7360 lbs (32.7 kg)
• Capacities
• Maximum PressureRelief pressure: 3046 PSI (210 bar)
• Hydraulics
• Hydraulic FlowPump flow, Standard Flow: 24.2 gpm (91.5 Lpm)
• Weights
• Weight, In Running Order10100 lbs (4581 kg)