2020 Arcusin Autopick GTi + PARK 60

2020 Arcusin Autopick GTi + PARK 60

The best work partner

• Undisputed leader in the shaker equipment sector (for trees from 10 to 40 cm in diameter)

• Advanced technology, mobility and adaptability.

• A single operator with a tractor is all that is needed to produce high yields.

• For the maximum pick at the minimum cost. The fruit is left clean, undamaged and ready for sale or subsequent processing.

• The machine acts directly on the tree trunk.

• Can be used to harvest both olives and all types of nuts.

• Can be adapted to shake all types of tree in all kinds of orchard.

• Full shaking coverage.

Features may include:

• Two position mobile bars:

• A: They boost vibration, the so called “knocking down” position.

• B: Conventional closing movement for gathering the fruits or nuts inside the receiving hopper.

• Rear coupling on the tree points of the tractor.

• Front coupling to the shovel.

• These types of set up make possible to lift the whole unit to enable a direct download to the trailer.

• Tractor: Minimum recommended power of 100 CV, standard with four wheel drive engagement.

• PTO output of 540 rpm

• Two circuits with independent pumps:

• Vibration : Closed circuit: Maximum flow 116 litres/minute. Maximum pressure 350 bar.

• Movements : Open circuit: Maximum flow 62 litres/minute. Maximum pressure 180 bar.

• Compact and refrigerated 50 litre hydraulic tank.

• Ability to adapt to the needs and characteristics of each plantation, as long as the development of the tree allows it, ensuring a perfect vibration coverage. Adaptation of the clamp to the natural position of the trunk. Floating clamp.

• The clamp is equipped with natural rubber pads. Its shape allows the modification of their assembly position to better adapt to the surface of the different tree trunk sizes.

• Protective skirt pads for a higher durability of the pads and a better care of the tree.

• Both the pads and the skirt pads are available in different degrees of hardness to better adapt to all types of plantations and harvesting periods.

• Adjustable gripping pressure of the head to prevent damages to the bark of the trees.

• The head is the part of the machine that transmits an excellent and soft vibration to the tree. This vibration is achieved by means of an eccentric mass with 6 adjustment positions which allow the selection of the vibration amplitude.

• Adjustable clamp. Useful for trees with trunks of = 8 cm up to = 45 cm. The maximum aperture of the clamp is 51.5 cm.

• Head integrated to receiving hopper.

• Automatic gripping function before the vibration begins.

• Automatic blockage of the clamps to prevent any pressure loss.