2023 Gearmore S Series - Orchard S205RR-CT

2023 Gearmore S Series - Orchard S205RR-CT

An important application for this tiller with rear roller is to bury wood chips by tilling 2 to 3 inches deep. The roller then slightly compacts and smooths out the orchard floor. The wood chips will decompose at a faster rate and the rolled out area is then in better condition for the harvesters. The University of California Cooperative Extension recommended keeping wood chips and shreddings in the orchards. They also stated that if well managed, prunings can become a source of organic matter and nutrients in the soil. These heavy duty tillers with 4 speed gearboxes are available in tilling widths of 83, 92, and102 inches.

They also stated that if well managed, prunings can become a source of organic matter and nutrients in the soil. Growers have found many more uses for the Incorporators. Such as - tilling out tractor tire tracks, mulching in weeds and general fl oor maintenance.

Features may include:

• Cat. II, 3-point hitch

• A.S.A.E. quick hitch compatibility for easy hook-up

• 4 Speeds @ 540 RPM & 2 speeds @ 1000 RPM

• Strong, smooth running, all gear fi nal drive

• Slip clutch driveshaft to protect tractor and tiller drive system

• New super alloy tungsten carbide coated tines, with normal life 3 to 4 times longer over standard heat treated tines

• 6 Tines mounted on each rotor plate for maximum tilling action

• Tines staggered in scroll design for easy soil penetration

• Gearbox supported by full length tubes for added support

• Torque tube frame to absorb shock loads

• Large, oil bath, long wearing rotor bearings

• Side mounted skids for depth control

• 16" Dia. x 1/4" wall steel tubing roller with adjustable mud scraper

• Easy to bolt up to standard S tiller

• Roller is 6" wider than side plates to eliminate ridges

• 2" Diameter solid roller bearing shaf

• 1/2" Plates between tiller and tailboard to contain the soil

• 4 Tailboard turnbuckles to hold the tailboard in place for releasing the exact amount of soil to the roller

• Heavy 1" x 3" roller mounting brackets