2023 Gearmore T Series - Orchard T355RR-CT

2023 Gearmore T Series - Orchard T355RR-CT

An important application for this tiller with rear roller is to bury wood chips by tilling 2 to 3 inches deep. The roller then slightly compacts and smooths out the orchard floor. The wood chips will decompose at a faster rate and the rolled out area is then in better condition for the harvesters. The University of California Cooperative Extension recommended keeping wood chips and shreddings in the orchards. They also stated that if well managed, prunings can become a source of organic matter and nutrients in the soil. These heavy duty T Series tillers with 4 speed gearboxes are available in tilling widths of 110, 120, and 140 inches.

Growers have found many more uses for the Incorporators. Such as - tilling out tractor tire tracks, mulching in weeds and general fl oor maintenance.

• Cat. II, 3-point hitch

• 4 Speed gearbox - 2 speeds @ 540 RPM & 2 speeds @ 1000 RPM

• For tractors up to a maximum of 160 HP

• Strong, smooth running, all gear fi nal drive

• Slip clutch driveshaft to protect tractor and tiller drive system

• New super alloy tungsten carbide coated tines, with normal life 3 to 4 times longer over standard heat treated tines

• Tines staggered in scroll design for easy soil penetration

• Gearbox supported by full length tubes for added support

• Torque tube frame to absorb shock loads

• Tiller is balanced to eliminate vibration

• Large, oil bath, long wearing rotor bearings

• Powder coated, baked-on paint to reduce corrosion

• Side mounted skids for depth control

• Dual adjustable rolling discs to cut and feed material into the tilling chamber

• 18" Dia. x 1/4" thick wall steel tubing roller with adjustable mud scraper

• Turnbuckle roller adjustment to obtain exact required compaction

• Easy to bolt up to standard T tiller

• Roller is 6" wider than side plates to eliminate ridges

• 2" Diameter solid bearing shaft

• 1/2" Thick bolt-on plate between tiller and tailboard to contain soil

• 4 Tailboard turnbuckles to hold the tailboard in place for releasing the exact amount of soil to the roller

• Heavy 1" x 3" roller mounting brackets

• Orchard Package built by one of central California's best specialty manufacturers.

• These Orchard Mulch Incorporators come assembled and adjusted so little if any fi eld setting is required.