2024 New Holland Construction Tractor Loaders U80D

Current New Holland Construction Equipment Tractor Loaders

Swipe to View More

Year 2024
Make New Holland Construction
Model Tractor Loaders
Engine F5HFL463D F005

Shop New Holland Construction Pre-Owned

Product Details Specifications Photos

Year 2024
Manufacturer New Holland Construction
Model Name Tractor Loaders
Trim Name U80D
Generic Type (Primary) Large
Engine F5HFL463D F005
Aspiration Turbocharged
Cylinder Liners 4
Engine Power Horsepower (SAE J1349) Gross @ 2,200 rpm: 74 hp (55 kW) | Net @ 2,200 rpm: 68.4 hp (51 kW)
Displacement 207 in3 (3.4 l)
Bore 3.9 in (99 mm)
Stroke 4.33 in (110 mm)
Rated Engine Speed Full load: 2,200 RPM | Low idle: Low idle RPM | High idle, no load: 2,330 - 2,430 RPM
Engine Torque, Maximum Gross: 233 lb-ft (316 Nm) | Net: 219 lb-ft (298 Nm) | Torque rise at rated speed: 35%
Torque Converter Torque converter ratio (standard): 3:1 | Torque converter (PTO ready): 3.2:1

PROFIT-MAKING POWER ON THE FRONT AND THE BACK

The New Holland U80D tractor loader gives you versatility that pays. With 74 gross hp, you get responsive power at both the bucket and hitch for loading, stacking, scraping and leveling. The U80D produces clean power, meeting Tier 4 Final certifications by using a Particular Matter Catalyst (PM-Cat) solution. This solution is based on particulate matter’s continuous passive regeneration of soot by NO2 generated on the DOC: C + NO2 = NO + CO/CO2.

Features may include:

Operator Environment

The large, efficient, flat-deck operator platform provides easy-to-use controls and unobstructed views for outstanding visibility of the work site.

Engine And Chassis

With 74 gross hp of clean power produced by its Tier 4 Final certified engine, you get responsive power at both the bucket and hitch for loading, stacking, scraping and leveling. The U80D meets Tier 4 Final certifications by using a Particular Matter Catalyst (PM-Cat) solution. This solution is based on particulate matter’s continuous passive regeneration of soot by NO2 generated on the DOC: C + NO2 = NO + CO/CO2.

Axles And Transmission

The smooth synchromesh with power shuttle lets you make smooth direction changes between the four forward and four reverse gears.

Hydraulics

The curved-arm loader linkage provided on the U80D tractor loader provides hydraulic bucket leveling for less spillback, as well as excellent reach at maximum dump height for truck loading. The unique reverse-mounted loader arm cylinders give you maximum bucket breakout force and superior dump speed on the bucket.

Maintenance

Routine care is the key to equipment performance and longevity. The D Series tractor loader is designed for fast, easy routine service checks. Easy access is provided to all key fuel, engine, transmission and hydraulic filters, and all engine servicing can now be performed from one side for added convenience.

Engine

Engine F5HFL463D F005

Aspiration Turbocharged

Cylinder Liners 4

Engine Power Horsepower (SAE J1349) Gross @ 2,200 rpm: 74 hp (55 kW) | Net @ 2,200 rpm: 68.4 hp (51 kW)

Displacement 207 in3 (3.4 l)

Bore 3.9 in (99 mm)

Stroke 4.33 in (110 mm)

Rated Engine Speed Full load: 2,200 RPM | Low idle: Low idle RPM | High idle, no load: 2,330 - 2,430 RPM

Engine Torque, Maximum Gross: 233 lb-ft (316 Nm) | Net: 219 lb-ft (298 Nm) | Torque rise at rated speed: 35%

Torque Converter Torque converter ratio (standard): 3:1 | Torque converter (PTO ready): 3.2:1

Fuel System

Fuel Injection Direct HPCR (High Pressure Common Rail)

Drivetrain

Transmission 4 speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control, clutch disconnect buttons on the transmission shifter and loader control lever

Differential Lock On the go push-button activation

Wheels & Tires

Tires, Front Specification 2/4 WD-17.5 L x 24, 10-ply rating STD, 2/4 WD-19.5 L x 24, 10-ply rating OPT

Tires, Rear Specification 2/4 WD-17.5 L x 24, 10-ply rating STD, 2/4 WD-19.5 L x 24, 10-ply rating OPT

Brakes

Brake System Type Individually applied hydraulically actuated, maintenance-free, self adjusting outboard mounted wet disc

Parking Brake Trans Mounted SAHR (Spring Applied Hydraulic Release)

Electric

Electrical 12 Volts, negative ground | Power plugs, amps: 30 total

Alternator 120 amps

Battery

Battery Capacity, Maximum 850 CCA

Hydraulics

Hydraulic Pump Gear-type, transmission mounted, direct drive to engine crankshaft

Hydraulic Flow Loader flow @ rated engine rpm: 28.5 gpm @ 3,000 psi (108 L/min @ 207 bar) | Loader auxiliary hydraulics: 12 to 28.5 gpm (45.4 to 108 L/min)

Maximum Pressure Main relief pressure: 3,050 + 50 - 50 psi @ 28.5 gpm (210 + 3 - 3 bar @ 108 L/min)

Operational

Operating Speed Forward/Reverse (standard): 1st 3.8 mph (6.1 km/h) / 2nd 6.1 mph (9.8 km/h) / 3rd 12.8 mph (20.6 km/h) / 4th 24.0 mph (38.6 km/h) | Forward/Reverse (PTO Ready): 1st 3.5 mph (5.6 km/h) / 2nd 5.5 mph (8.9 km/h) / 3rd 11.8 mph (19 km/h) / 4th 21.3 mph (34.3 km/h)

Operating Conditions Lift cylinders Long Lip Bucket / 4 IN 1® Bucket : 9271 lb (41 239 N) / 8766 lb (38 993 N) | Dump cylinders Long Lip Bucket / 4 IN 1® Bucket: 9607 lb (42 734 N) / 10,325 lb (45 928 N)

Chassis

Hitch/Type 3-pt hitch flow @ rated engine rpm: 3 to 8 gpm @ 2,000 psi (0 to 30 L/min @ 137 bar) | 3-pt hitch control valve: Sectional 4-spool, open-center parallel circuits with variable control for lift, pitch, tilt, and 2 auxiliary remotes

Capacities

Hitch Lift Capacity to full height Long Lip Bucket / 4 IN 1® Bucket: 6,503 lbs (2950 kg) / 6,537 lbs (2965 kg)

Struck Level Long Life Bucket: .87 yd3 (.67 m3) | 4-in-1 Bucket: .85 yd3 (.65 m3)

Heaped Capacity Long Life Bucket: 1.03 yd3 (0.79 m3) | 4-in-1 Bucket: 1.04 yd3 (0.80 m3)

Fuel Capacity 30 gal (114 l)

Hydraulic Capacity Total: 19 gal (72 l) | Reservoir w/filter: 15.3 gal (58 l) | Reservoir w/o filter: 14.8 gal (56 l)

Features Transmission: 2WD Total system 4.5 gal (17 l) / 4WD Total system 5.25 gal (20 l)

Axle Capacity, Front 4WD Differential 5.8 qt (5.5 L) / Planetaries (each) 0.75 qt (0.7 L)

Axle Capacity, Rear Differential 14.4 qt (13.6 L) / Planetaries (each) 1.6 qt (1.5 L)

Oil capacity Engine oil w/filter: 8.5 qt (8 L)

Cooling System 17 qt (16.1 L)

Hitch Lift Capacity Lowest point: 2500 lbs (11,121 N) / 1/5: 3247 lbs (14,444 N) / 2/5: 3400 lbs (15,125 N) / 3/5: 3501 lbs (15,574 N) / 4/5: 3297 lbs (14,666 N) / Highest point: 2984 lbs (13,274 N)

Weights

Weight Base Unit (lbs. (kg): 10,916 lbs (495 kg) | 4-in-1 Bucket: 1451 lbs (658 kg)

Features

Features Loader control valve: 2 or 3-spool with single lever control for lift, dump and tilt and auxiliary hydraulics, positive hold float and return-to-dig | Filtration: 7 micron full flow replaceable cartridge on return line, condition indicator light for filter

2024 New Holland Construction Tractor Loaders U80D