2024 New Holland Pickup Heads 790CP - 15 Foot

Information

2024 New Holland Pickup Heads 790CP - 15 Foot

No Crop Forgotten

Unlike other multi-step combine heads, pickup heads have one job and one job only: to pick up the crop that’s already been cut. New Holland designed the suspension, auger fingers, seed dam, belts and frame for the express purpose of getting every bit of crop off the ground and transferring it safely to the feeder house. No pickup head does it better than New Holland.

Features may include:

A Clean Field Is A New Holland Field

Ideal for small grain and specialty crops, such as canola and grass seed, the 12- and 15-foot 790CP windrow pickup heads are designed to gather wider windrows, operate at faster field speeds and reduce seed loss to boost your harvesting productivity.

Photos

Highlights

  • Quincy, Washington
  • 2024
  • New Holland
  • Pickup Heads 790CP - 15 Foot
  • Fabricated trapezoid: 3 mm (0.12")
  • Available

Specifications

  • 2024
  • New Holland
  • Pickup Heads
  • 790CP - 15 Foot
  • Hay Forage Harvester Heads
  • 14T / 12T | LH drive only: Direct drive from feeder drive shaft to auger stub shaft | Protection: 850 Nm (626 ft-lb ) radial pin slip clutch
  • 187 / 160 RPM
  • Sprockets: 138 rpm
  • Castor wheels: 5720 mm (225 in.) | Fixed wheels: 211 mm (5365 in.) | Pitch flights: 508 mm (20 in.) | Flight thickness: 6 mm (0.25 in.) | OD: 660 mm (26 in.) | Fabricated center tube: 406 mm (16 in.) OD | Welded in auger floor thickness: 101.6 mm (4 in. ) | Welded in backsheets: 76.2 mm (3 in.) | Top beam HSS tubing: 150 x 150 x 4 mm (6 x 6 x .125 in.)
  • 5175 mm (204 in.)
  • Flighting: 154 mm (5 in.)
  • 1442 kg (3180 lbs.)
  • Chain tension adjustment: A push plate and jam nuts
  • Fabricated trapezoid: 3 mm (0.12")
  • Full welded construction