2022 Rears MFG ASH Base

Information

2022 Rears MFG ASH

The LSH and ASH shredders are our pull behind PTO brush shredders. The rigid bumped housing and front torsion pipes make this unit well suited to brush processing. Each machine comes standard with replaceable inner housing liner and replaceable shear teeth. Our CV hitch 3-point attachment provides the smooth transfer of power from your tractor to the rest of the drive train. A bottom brush panel under the hitch helps guide the brush piles into the large housing throat. Rear floating brush rakes gather the limbs back into the cutting path. The LSH model can be fitted with FL940 side slicer blades or FL970 hammers. The ASH model is fitted with FL8041 tungsten carbide hard faced hammers.

Features may include:
  • Tighter brush rake spacing.
  • Single or triple fork rakes on ASH model.
  • Single or dual rear tire struts.
  • 5 ft. - 10 ft. cutting swath widths.
  • Side inlet guides.

Photos

Highlights

  • Quincy, Washington
  • 2022
  • Rears MFG
  • ASH Base
  • Available
  • Cut: 0-6”

Specifications

  • 2022
  • Rears MFG
  • ASH
  • Base
  • Flail Mowers
  • CAT6 Input
  • Tip: 13,624 ft/min
  • 60" - 120" available
  • Single drive +16"; Dual drive +20"
  • Cut: 0-6”
  • Tube: 8-5/8” OD, 1/2” wall thickness. | Shaft: 2-7/16” shaft, bolt-on replaceable | Bearings: 2-7/16” double
  • Shaft: 2-7/16"
  • Rotor: bolt-onreplaceable | Rotor Bearings: row spherical bearing with auxilliary grease labyrinth protection | Rotation: Reverse
  • Flail housing- 3/16” steel | Replaceable bolt-in liner- 3/16” steel
  • mounts: 3/4” thick pads, hardened spring bushings
  • Drive: 5-groove 5V Powerband, single drive | 4-groove 4V Powerband, dual drive