2022 Rears MFG 750 Series Upright Profile 54 Narrow
- Year 2022
- Make Rears MFG
- Model 750 Series Upright Profile
2022 Rears MFG 750 Series Upright Profile 54 Narrow
2022 Rears MFG 750 Series Upright Profile 54 Narrow
The OMF is our low profile housing orchard shredder designed to work under low tree skirting. Each cutter drum features variably spaced clevis pad and blade or hammer assemblies to provide a smooth running and clean cutting operation. Each frame includes a multi-position rear deflector door which helps hold material in the cutting path longer. The models in this series have our proven belt tensioning system. Rotor and roller bearings are protected in the dirtiest environments by our labyrinth greasing system.
Features may include:- Fixed or hydraulic offset 3-point mast.
- 100, 200 and 700 series housing and drive configurations.
- Vineyard, upright or low profile belt housing profiles.
- FL948 hammer, FL940 side slicer or FL930 side slicer blades.
- Rear brush rakes.
- Front or rear tractor mounting.
PTO
PTO Power, Rated Engine Speed
540 rpm
PTO Type
Shielded, low friction rolled spline shaft ASAE Cat.6 U-Joints
Drivetrain
Gearbox
Ratio: 1:3.1 | Input: 1.375” 6 spline | Output: 1.375” 6 spline
Drive System
Belt: 4/5VX notched Powerband
Operational
Operating Speed
Rotor: 540 rpm
Chassis
Hitch/Type
3-point mount: Cat I & II with floating top link mount
Dimensions
Dimensions
Available swath: 4’ - 9’ | Housing: 38” plate inner housing, 316” plate skin
Overall Width
+ 15”
Height
Cut: 0” - 412” set with gauge roller | Flail housing: 19 1/4” | Belt housing: 31”
Width
Pantograph offset by swath: (-10)-12”
Roller Diameter
6 5/8” diameter | 1 3/4” diameter shaft
Rotor Diameter
bearing: 2.44” double spherical roller bearing | Narrow units: 2.44” | construction: 8 5/8” diameter mandrel, .50” wall / 2.44” dia. shaft | Rotor pad, bolt: 1 1/2” rotor pad with 3/4” bore, grade 9 mount bolt
Weights
Weight
6’ 2087 lbs +/- 155 lbs/ft + blades
Features
Features
Skid shoes: retreadable | Debris guard: Chain guard, belt guards available | Rear recycling door: 3 position door | Rakes: Floating rakes available
Bearing Hanger Type
Roller: Triple seal bearing in piloted steel housing with antiwrap. Pilot housing joints with machined slot in height adjustment plate to bear flail weight. | Rotor: Renewable grease labyrinth protection and antiwrap | Narrow units: double spherical roller bearing Internal mount housing
Construction Material
Rotor: 1045 carbon steel
Shear Bar
Fixed tooth