2021 Roto-Mix® Horizontal Rotary Feed Mixers Trailers 274-12B

2021 Roto-Mix® Horizontal Rotary Feed Mixers Trailers 274-12B

Model 274-12B Commercial Series Feed Mixer

The 274-12B Commercial is a horizontal rotary feed mixer with a mixing capacity of 270 cu. ft. and can hold a maximum load with a heavy ration up to 8100 lbs. It comes standard with the patented Roto-Mix® Mixing System

Trailer models are mounted on heavy-duty tubular steel trailer frames, complete with built-in scale mountings. Heavy-duty eight- or ten-bolt hubs and spindles with a selection of tires for eight- and ten-hole wheels. The single pole trailer tongue is constructed of heavy wall tubing for a shorter turning radius. A sturdy rear bumper and an adjustable, replaceable trailer hitch clevis are also standard equipment.

Features may include:

• Flared tub side increases tumbling action with ration containing hay or other long stem forages. Single point latch system for increased accessability.

• Rotor is equipped with spring tension bars which relieve pressure and eliminate wedging of bulky materials. The UHMW wiper blades are adjustable for fast, effective cleanout.

• The Hay Processor keeps large chunks of hay out of the mixing chamber until processed by the knives on the top auger.

• Complete heavy-duty drive assembly runs in an enclosed oil bath. Extra heavy-duty drive available on select models.

• The single point grease bank allows easy access to main lubrication points from the ground.

• Heavy-duty tubular trailer frame ensures long life and maximum scale accuracy. Single pole tongue allows the tightest turning radius possible.

• Adjustable hitch clevis allows an operator to level mixer with most tractors to maximize mixer efficiency.

• Easy access rear doors with single point latches.

• To control feed flow, the variable discharge door is hydraulically operated and can be opened or closed with the mixer running. Wide gravity discharge spout has no moving parts

• Extra-heavy, small diameter wall auger tubes give maximum life with less maintenance. Hay knives are hard surfaced to provide a self-sharpening effect; thereby, cutting the hay to the proper length while giving the knives an extended life.

• The patented rotor lifts feed up to the side augers that move the feed from end-to-end for thorough mixing. The lifting action of the rotor eliminates wedging of the hay or long cut feeds under the lower auger. Patented tumbling design allows easier pulling mixer action, reducing the load on the PTO, drive line and transmission.

• Flanged rotor and augers allow for easy removal. Patented double flighted top auger keeps large chunks of hay out of the mixing chamber until processed.