2024 Salford ST-Series Applicators 300 cu-ft

2024 Salford ST-Series Applicators 300 cu-ft

The Salford Valmar ST-Series takes fertilizer application to the next level. With four models to choose from, ST-4, ST-6, ST-10 and ST-12, this strip till granular fertilizer applicator is ideal for high-capacity application of nutrients, fertilizer, seed and cover crops and granular herbicide. The ST line up offers a range of steerable carts and applicators available for mounting on other equipment. ST applicators are equipped with hydraulically driven metering and can be used for variable rate application.

The ST Series uses the field-proven peg roller metering system. This system is known for its extreme accuracy and when compared to auger metering, is less susceptible to plugging, are easier to change and do not grind product. The 2 or 4-section, hydraulicly driven metering system allows for straight rate application or variable rate and automatic section control using ISOBUS connected to a third-party rate controller.

The peg rollers are equipped with brushes for self-cleaning during operation. Spring loaded gates can be dropped to block product from spilling out while the roller sections snap in and out easily for cleaning and inspection. These features ensure that you can keep your ST metering system clean and achieving accurate application rates.

The ST-6 and ST-10 can be mounted on Salford’s self-steering Pathfinder Cart. The 5-link mechanical steering uses the Ackerman steering principal by which the inner wheel turns more sharply than the outer wheel. This combined with a long hitch allows the cart to mimic the travel of the leading implement with a higher degree of precision. The high clearance axle allows the cart to follow application toolbars in standing crop without causing damage to the rows. Tire options include 380/90R46 173D tires (standard).

The polymer hoppers on the ST Series are durable, corrosion resistant and allow for visual monitoring of product level in the bin. Within the ST Series are 4 hopper configurations; the ST-4 (single 4-ton hopper), the ST-6 (single 6-ton hopper), ST-10 (4-ton and 6-ton dual hopper), and the ST-12 (double 6-ton dual hopper). The dual hopper configuration on the ST-10 and ST-12 drops product from the two separate hoppers into a single funnel which feeds the venturi air stream for the highest possible blending accuracy and efficiency. There is no need to run two sets of air lines to the application unit as all the blending happens right at the metering system.

All ST models allow for the option of 8, 12, 16, 18, 20, or 24 outlets. Making it a fit for any tool whether it’s a planter, strip-till bar, harrow, tillage unit, or any other implement.